From andyo at oreilly.com Wed Jun 13 00:56:05 2018 From: andyo at oreilly.com (Andy Oram) Date: Wed, 13 Jun 2018 03:56:05 -0400 Subject: [FM Discuss] Introduction to the Command Line: authors wanted Message-ID: This book is being updated by FLOSS Manuals and the Free Software Foundation. Everything should be in place for people to jump in and edit. Please visit this wiki first to see what we're trying to accomplish: *https://libreplanet.org/wiki/Ittcl * You can edit the wiki too, to make it clearer or more appealing. We are also accepting ideas for topics. We don't want to lengthen this book. We can take out parts that are less important, to make room for important new material such as Git. Andy Oram | Editor O'Reilly Media, Inc. | 617-499-7479 | oreilly.com [image: oreilly_email_logo.png] -------------- next part -------------- An HTML attachment was scrubbed... URL: From gpittman at iglou.com Wed Jun 13 06:29:00 2018 From: gpittman at iglou.com (Gregory Pittman) Date: Wed, 13 Jun 2018 09:29:00 -0400 Subject: [FM Discuss] Introduction to the Command Line: authors wanted In-Reply-To: References: Message-ID: <9c7f6d85-ffab-62dc-b5fd-f10fc5d5183f@iglou.com> On 06/13/2018 03:56 AM, Andy Oram wrote: > This book is being updated by FLOSS Manuals and the Free Software > Foundation. Everything should be in place for people to jump in and > edit. Please visit this wiki first to see what we're trying to accomplish: > > * > > https://libreplanet.org/wiki/Ittcl > > * > You can edit the wiki too, to make it clearer or more appealing. We are > also accepting ideas for topics. > > We don't want to lengthen this book. We can take out parts that are less > important, to make room for important new material such as Git. > Hi Andy, >From what I can see, I don't think there is any way to avoid lengthening the book. Just a cursory look suggests to me a number of topics that really should be added, like alias, sftp, and something more about some very useful ImageMagick commands like montage. Greg From andyo at oreilly.com Wed Jun 13 06:53:52 2018 From: andyo at oreilly.com (Andy Oram) Date: Wed, 13 Jun 2018 09:53:52 -0400 Subject: [FM Discuss] Introduction to the Command Line: authors wanted In-Reply-To: <9c7f6d85-ffab-62dc-b5fd-f10fc5d5183f@iglou.com> References: <9c7f6d85-ffab-62dc-b5fd-f10fc5d5183f@iglou.com> Message-ID: Thanks so much for checking the project out, Greg. If we have to increase the length a bit, we will. But I think we can take out some material that is less relevant today, or less of interest. Andy Oram | Editor O'Reilly Media, Inc. | 617-499-7479 | oreilly.com [image: oreilly_email_logo.png] On Wed, Jun 13, 2018 at 9:29 AM, Gregory Pittman wrote: > On 06/13/2018 03:56 AM, Andy Oram wrote: > > This book is being updated by FLOSS Manuals and the Free Software > > Foundation. Everything should be in place for people to jump in and > > edit. Please visit this wiki first to see what we're trying to > accomplish: > > > > * > > > > https://libreplanet.org/wiki/Ittcl > > > > * > > You can edit the wiki too, to make it clearer or more appealing. We are > > also accepting ideas for topics. > > > > We don't want to lengthen this book. We can take out parts that are less > > important, to make room for important new material such as Git. > > > > Hi Andy, > > From what I can see, I don't think there is any way to avoid lengthening > the book. Just a cursory look suggests to me a number of topics that > really should be added, like alias, sftp, and something more about some > very useful ImageMagick commands like montage. > > Greg > > _______________________________________________ > Discuss mailing list > Discuss at lists.flossmanuals.net > http://lists.flossmanuals.net/listinfo.cgi/discuss-flossmanuals.net - you > can unsubscribe here > -------------- next part -------------- An HTML attachment was scrubbed... URL: From gpittman at iglou.com Wed Jun 13 07:08:46 2018 From: gpittman at iglou.com (Gregory Pittman) Date: Wed, 13 Jun 2018 10:08:46 -0400 Subject: [FM Discuss] Introduction to the Command Line: authors wanted In-Reply-To: References: <9c7f6d85-ffab-62dc-b5fd-f10fc5d5183f@iglou.com> Message-ID: <9d5139f5-6af9-b81e-860f-43ebef1e15fb@iglou.com> On 06/13/2018 09:53 AM, Andy Oram wrote: > Thanks so much for checking the project out, Greg. If we have to > increase the length a bit, we will. But I think we can take out some > material that is less relevant today, or less of interest. > > I think maybe a better approach might be to at first allow for some lengthening, then later in the process edit it down as you compare various parts. Personally, I think the little section on Python is expendable, for example. Shell scripts are much more straightforward than the ways you need to bend Python to use system commands. There's also a bit of repetition with some commands. Greg From andyo at oreilly.com Wed Jun 13 13:41:01 2018 From: andyo at oreilly.com (Andy Oram) Date: Wed, 13 Jun 2018 16:41:01 -0400 Subject: [FM Discuss] Introduction to the Command Line: authors wanted In-Reply-To: <9d5139f5-6af9-b81e-860f-43ebef1e15fb@iglou.com> References: <9c7f6d85-ffab-62dc-b5fd-f10fc5d5183f@iglou.com> <9d5139f5-6af9-b81e-860f-43ebef1e15fb@iglou.com> Message-ID: Thanks again, Greg. Let me ask a general question: do members of this list want a detailed discussion on this list about items to add, remove, and update in the book? I know that details about FLOSS Manuals books are sometimes discussed on this list, but I don't want to overload everybody's email boxes. On the other hand, the wiki at the Free Software Foundation is not as appropriate for discussion as email (hopefully to be archived). Andy Oram | Editor O'Reilly Media, Inc. | 617-499-7479 | oreilly.com [image: oreilly_email_logo.png] On Wed, Jun 13, 2018 at 10:08 AM, Gregory Pittman wrote: > On 06/13/2018 09:53 AM, Andy Oram wrote: > > Thanks so much for checking the project out, Greg. If we have to > > increase the length a bit, we will. But I think we can take out some > > material that is less relevant today, or less of interest. > > > > > > I think maybe a better approach might be to at first allow for some > lengthening, then later in the process edit it down as you compare > various parts. Personally, I think the little section on Python is > expendable, for example. Shell scripts are much more straightforward > than the ways you need to bend Python to use system commands. > > There's also a bit of repetition with some commands. > > Greg > > _______________________________________________ > Discuss mailing list > Discuss at lists.flossmanuals.net > http://lists.flossmanuals.net/listinfo.cgi/discuss-flossmanuals.net - you > can unsubscribe here > -------------- next part -------------- An HTML attachment was scrubbed... URL: From gpittman at iglou.com Wed Jun 13 16:37:35 2018 From: gpittman at iglou.com (Gregory Pittman) Date: Wed, 13 Jun 2018 19:37:35 -0400 Subject: [FM Discuss] Introduction to the Command Line: authors wanted In-Reply-To: References: <9c7f6d85-ffab-62dc-b5fd-f10fc5d5183f@iglou.com> <9d5139f5-6af9-b81e-860f-43ebef1e15fb@iglou.com> Message-ID: <94850dcc-efe8-4688-afdf-7f392b251877@iglou.com> On 06/13/2018 04:41 PM, Andy Oram wrote: > Thanks again, Greg. Let me ask a general question: do members of this > list want a detailed discussion on this list about items to add, remove, > and update in the book? I know that details about FLOSS Manuals books > are sometimes discussed on this list, but I don't want to overload > everybody's email boxes. On the other hand, the wiki at the Free > Software Foundation is not as appropriate for discussion as email > (hopefully to be archived). > I've been a member for many years, yet not necessarily so active, but I haven't seen that very much. I would think that discussions about the editing and content should take place in its own space. We'll need to see Mick Chesterman weigh in on this. Greg From jaysinhp at gmail.com Wed Jun 13 20:40:29 2018 From: jaysinhp at gmail.com (Jaysinh shukla) Date: Thu, 14 Jun 2018 09:10:29 +0530 Subject: [FM Discuss] Introduction to the Command Line: authors wanted In-Reply-To: References: Message-ID: On Wed, Jun 13, 2018 at 1:26 PM, Andy Oram wrote: > This book is being updated by FLOSS Manuals and the Free Software > Foundation. Everything should be in place for people to jump in and edit. > Please visit this wiki first to see what we're trying to accomplish: > > *https://libreplanet.org/wiki/Ittcl * > You can edit the wiki too, to make it clearer or more appealing. We are > also accepting ideas for topics. > > We don't want to lengthen this book. We can take out parts that are less > important, to make room for important new material such as Git. > > Andy Oram | Editor > O'Reilly Media, Inc. | 617-499-7479 | oreilly.com > > [image: oreilly_email_logo.png] > > > > _______________________________________________ > Discuss mailing list > Discuss at lists.flossmanuals.net > http://lists.flossmanuals.net/listinfo.cgi/discuss-flossmanuals.net - you > can unsubscribe here > > Hello Andy, I read this book last year. I found the content was very much helpful to me. I wrote a blog post reviewing this book that you can find here ( http://blog.jaysinh.com/book/review/2017/02/28/book-review-introduction-to-the-commandline.html). During my reading, I found few mistakes. Because the book is open, I was able to fix them myself. I observed the response to release those fixies is weak. I have submitted an improvement since more than one year. Yet, those improvements weren't released. -- Jaysinh :) -------------- next part -------------- An HTML attachment was scrubbed... URL: From mick at flossmanuals.net Wed Jun 13 22:44:31 2018 From: mick at flossmanuals.net (mick at flossmanuals.net) Date: Thu, 14 Jun 2018 06:44:31 +0100 Subject: [FM Discuss] Introduction to the Command Line: authors wanted In-Reply-To: References: Message-ID: <4fc7824d-552b-6b4f-fdf1-a1def489bf3f@flossmanuals.net> Hi Jaysinh, This is a happy and sad tale! Happy that you were able to join an open community to make improvements but sad that it was not clear how to make those changes live. We'll definitely have to work on that! What would have helped you here? Thanks Mick On 14/06/18 04:40, Jaysinh shukla wrote: > > Hello Andy, > > ? ? I read this book last year. I found the content was very much > helpful to me. I wrote a blog post?reviewing this book that you can > find here > (http://blog.jaysinh.com/book/review/2017/02/28/book-review-introduction-to-the-commandline.html). > During my reading, I found few mistakes. Because the book is open, I > was able to fix them myself. I observed the response to release those > fixies is weak. I have submitted an improvement since more than one > year. Yet, those improvements weren't released. -------------- next part -------------- An HTML attachment was scrubbed... URL: From mick at flossmanuals.net Wed Jun 13 22:51:39 2018 From: mick at flossmanuals.net (mick at flossmanuals.net) Date: Thu, 14 Jun 2018 06:51:39 +0100 Subject: [FM Discuss] Introduction to the Command Line: authors wanted In-Reply-To: <94850dcc-efe8-4688-afdf-7f392b251877@iglou.com> References: <9c7f6d85-ffab-62dc-b5fd-f10fc5d5183f@iglou.com> <9d5139f5-6af9-b81e-860f-43ebef1e15fb@iglou.com> <94850dcc-efe8-4688-afdf-7f392b251877@iglou.com> Message-ID: <50009d68-55fc-b0f3-d1af-a5d99af91892@flossmanuals.net> Hi Andy, I would agree that a separate space for the blow by blow rather than this list would be good. We are moving to gitlab wiki for some things - you would be welcome to use that space. That would be nice for the FM community too. https://gitlab.com/flossmanuals/fm_booktype/wikis/home In terms of a user manual for Omnibook / Booktype to send people to. I think this is the up to date one. http://sourcefabric.booktype.pro/booktype-24-for-authors-and-publishers/what-is-booktype/ Thanks Mick On 14/06/18 00:37, Gregory Pittman wrote: > On 06/13/2018 04:41 PM, Andy Oram wrote: >> Thanks again, Greg. Let me ask a general question: do members of this >> list want a detailed discussion on this list about items to add, remove, >> and update in the book? I know that details about FLOSS Manuals books >> are sometimes discussed on this list, but I don't want to overload >> everybody's email boxes. On the other hand, the wiki at the Free >> Software Foundation is not as appropriate for discussion as email >> (hopefully to be archived). >> > I've been a member for many years, yet not necessarily so active, but I > haven't seen that very much. I would think that discussions about the > editing and content should take place in its own space. > > We'll need to see Mick Chesterman weigh in on this. > > Greg > > _______________________________________________ > Discuss mailing list > Discuss at lists.flossmanuals.net > http://lists.flossmanuals.net/listinfo.cgi/discuss-flossmanuals.net - you can unsubscribe here From andyo at oreilly.com Thu Jun 14 03:44:06 2018 From: andyo at oreilly.com (Andy Oram) Date: Thu, 14 Jun 2018 06:44:06 -0400 Subject: [FM Discuss] Introduction to the Command Line: authors wanted In-Reply-To: <50009d68-55fc-b0f3-d1af-a5d99af91892@flossmanuals.net> References: <9c7f6d85-ffab-62dc-b5fd-f10fc5d5183f@iglou.com> <9d5139f5-6af9-b81e-860f-43ebef1e15fb@iglou.com> <94850dcc-efe8-4688-afdf-7f392b251877@iglou.com> <50009d68-55fc-b0f3-d1af-a5d99af91892@flossmanuals.net> Message-ID: I'm glad FLOSS Manuals has a wiki, Mick. But because the Free Software Foundation already set up a wiki page for us, as I reported earlier in this email thread, let's use that for the Introduction to the Command Line: *https://libreplanet.org/wiki/Ittcl * Jaysinh, I greatly appreciate the thorough review of the book, and your fixes. My understanding of the FLOSS Manuals process (which someone else can comment on) is this: anyone can change the "write" online copy of the book. The change doesn't go into the "read" or print copy until it is approved by someone who is given authority by FLOSS Manuals. Nobody has taken on that authority so far. I personally can see that the $args bug you pointed out is a real error, and probably your other fixes are correct too. I think we were all waiting until we did an official revision of the book before releasing fixes. But we have been waiting too long. I am willing to try to commit the fixes to the "read" version over the next week. I also added Jaysinh's euggestion for exercises to the FSF wiki. Andy Oram | Editor O'Reilly Media, Inc. | 617-499-7479 | oreilly.com [image: oreilly_email_logo.png] On Thu, Jun 14, 2018 at 1:51 AM, mick at flossmanuals.net < mick at flossmanuals.net> wrote: > Hi Andy, > > I would agree that a separate space for the blow by blow rather than > this list would be good. > > We are moving to gitlab wiki for some things - you would be welcome to > use that space. That would be nice for the FM community too. > https://gitlab.com/flossmanuals/fm_booktype/wikis/home > > In terms of a user manual for Omnibook / Booktype to send people to. I > think this is the up to date one. > http://sourcefabric.booktype.pro/booktype-24-for-authors- > and-publishers/what-is-booktype/ > > Thanks > Mick > > On 14/06/18 00:37, Gregory Pittman wrote: > > On 06/13/2018 04:41 PM, Andy Oram wrote: > >> Thanks again, Greg. Let me ask a general question: do members of this > >> list want a detailed discussion on this list about items to add, remove, > >> and update in the book? I know that details about FLOSS Manuals books > >> are sometimes discussed on this list, but I don't want to overload > >> everybody's email boxes. On the other hand, the wiki at the Free > >> Software Foundation is not as appropriate for discussion as email > >> (hopefully to be archived). > >> > > I've been a member for many years, yet not necessarily so active, but I > > haven't seen that very much. I would think that discussions about the > > editing and content should take place in its own space. > > > > We'll need to see Mick Chesterman weigh in on this. > > > > Greg > > > > _______________________________________________ > > Discuss mailing list > > Discuss at lists.flossmanuals.net > > http://lists.flossmanuals.net/listinfo.cgi/discuss-flossmanuals.net - > you can unsubscribe here > > _______________________________________________ > Discuss mailing list > Discuss at lists.flossmanuals.net > http://lists.flossmanuals.net/listinfo.cgi/discuss-flossmanuals.net - you > can unsubscribe here > -------------- next part -------------- An HTML attachment was scrubbed... URL: From mick at flossmanuals.net Fri Jun 15 05:44:21 2018 From: mick at flossmanuals.net (mick at flossmanuals.net) Date: Fri, 15 Jun 2018 13:44:21 +0100 Subject: [FM Discuss] Introduction to the Command Line: authors wanted In-Reply-To: References: <9c7f6d85-ffab-62dc-b5fd-f10fc5d5183f@iglou.com> <9d5139f5-6af9-b81e-860f-43ebef1e15fb@iglou.com> <94850dcc-efe8-4688-afdf-7f392b251877@iglou.com> <50009d68-55fc-b0f3-d1af-a5d99af91892@flossmanuals.net> Message-ID: <9d87fafd-a84f-b5fa-3375-e2ee19fdb116@flossmanuals.net> On 14/06/18 11:44, Andy Oram wrote: > I think we were all waiting until we did an official revision of the > book before releasing fixes. But we have been waiting too long. I am > willing to try to commit the fixes to the "read" version over the next > week. Let me know if/when you want to do this Andy and we can do this off list. Thanks Mick From mick at flossmanuals.net Tue Jun 19 06:22:25 2018 From: mick at flossmanuals.net (mick at flossmanuals.net) Date: Tue, 19 Jun 2018 14:22:25 +0100 Subject: [FM Discuss] Chuck manual - was deleting a paragraph In-Reply-To: References: Message-ID: <9fd861c3-8529-b484-6d51-d95175823d5e@flossmanuals.net> Hi there Mario, Great work on the edits you and your team have been making. Should we update the manual listed at http://flossmanuals.net? Also I generated a couple of pdfs here - could you check them and see which one you prefer? https://omnibook.pro/chuck/_edit/#publish Let me know if you can't see them. Thanks Mick On 03/03/18 18:38, mario buoninfante wrote: > > > thanks, I've got access to the ChucK manual using the code you sent me. > > my username is mario.buoninfante > > > cheers, > > Mario > > _______________________________________________ > Discuss mailing list > Discuss at lists.flossmanuals.net > http://lists.flossmanuals.net/listinfo.cgi/discuss-flossmanuals.net - > you can unsubscribe here From mario.buoninfante at gmail.com Wed Jun 20 11:19:12 2018 From: mario.buoninfante at gmail.com (mario buoninfante) Date: Wed, 20 Jun 2018 19:19:12 +0100 Subject: [FM Discuss] Chuck manual - was deleting a paragraph In-Reply-To: <9fd861c3-8529-b484-6d51-d95175823d5e@flossmanuals.net> References: <9fd861c3-8529-b484-6d51-d95175823d5e@flossmanuals.net> Message-ID: Hi Mick, that's absolutely fine by me. the only thing I can't see any PDF there. cheers, Mario On 19/06/18 14:22, mick at flossmanuals.net wrote: > Hi there Mario, > > Great work on the edits you and your team have been making. > > Should we update the manual listed at http://flossmanuals.net? > > Also I generated a couple of pdfs here - could you check them and see > which one you prefer? > > https://omnibook.pro/chuck/_edit/#publish > > Let me know if you can't see them. > > Thanks > > Mick > > > On 03/03/18 18:38, mario buoninfante wrote: >> >> thanks, I've got access to the ChucK manual using the code you sent me. >> >> my username is mario.buoninfante >> >> >> cheers, >> >> Mario >> >> _______________________________________________ >> Discuss mailing list >> Discuss at lists.flossmanuals.net >> http://lists.flossmanuals.net/listinfo.cgi/discuss-flossmanuals.net - >> you can unsubscribe here From mick at flossmanuals.net Fri Jun 22 01:03:43 2018 From: mick at flossmanuals.net (mick at flossmanuals.net) Date: Fri, 22 Jun 2018 09:03:43 +0100 Subject: [FM Discuss] PDF generation error on Omnibook for 
 code [was -
 Chuck manual ]
In-Reply-To: 
References: 
 <9fd861c3-8529-b484-6d51-d95175823d5e@flossmanuals.net>
 
Message-ID: <3d8b7696-3173-4436-6e8b-20bb1d65fc3c@flossmanuals.net>

Hi there Mario,

I've sent you the links in another email.
I have noticed the same bug that Greg mentioned and I've logged it here.

https://dev.sourcefabric.org/browse/BK-2501

Please note - anyone thinking of creating a book which requires a pdf
output and may need long 
 code entries should be aware of this.
Andy O, I'm thinking of you especially here.

Bug report follows.

Hi there,

Pdf outputs do not format 
 code correctly - no line wrapping.As
many of Floss manuals books have such code we can't really progress,
without some kind of work around.
Screenshot example attached - this is a pdf screen output from following
manual - Chapter 14 is shown.

https://omnibook.pro/chuck/_edit/#toc

Thanks

Mick


On 20/06/18 19:19, mario buoninfante wrote:
> Hi Mick,
>
> that's absolutely fine by me. the only thing I can't see any PDF there.
>
>
> cheers,
>
> Mario
>
>
> On 19/06/18 14:22, mick at flossmanuals.net wrote:
>> Hi there Mario,
>>
>> Great work on the edits you and your team have been making.
>>
>> Should we update the manual listed at http://flossmanuals.net?
>>
>> Also I generated a couple of pdfs here - could you check them and see
>> which one you prefer?
>>
>> https://omnibook.pro/chuck/_edit/#publish
>>
>> Let me know if you can't see them.
>>
>> Thanks
>>
>> Mick
>>
>>
>> On 03/03/18 18:38, mario buoninfante wrote:
>>>
>>> thanks, I've got access to the ChucK manual using the code you sent me.
>>>
>>> my username is mario.buoninfante
>>>
>>>
>>> cheers,
>>>
>>> Mario
>>>
>>> _______________________________________________
>>> Discuss mailing list
>>> Discuss at lists.flossmanuals.net
>>> http://lists.flossmanuals.net/listinfo.cgi/discuss-flossmanuals.net -
>>> you can unsubscribe here
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: chapt_14_chuck.png
Type: image/png
Size: 28408 bytes
Desc: not available
URL: 

From mario.buoninfante at gmail.com  Sat Jun 23 03:58:25 2018
From: mario.buoninfante at gmail.com (mario buoninfante)
Date: Sat, 23 Jun 2018 11:58:25 +0100
Subject: [FM Discuss] PDF generation error on Omnibook for 
 code
 [was - Chuck manual ]
In-Reply-To: <3d8b7696-3173-4436-6e8b-20bb1d65fc3c@flossmanuals.net>
References: 
 <9fd861c3-8529-b484-6d51-d95175823d5e@flossmanuals.net>
 
 <3d8b7696-3173-4436-6e8b-20bb1d65fc3c@flossmanuals.net>
Message-ID: 

Hi Mick,


thanks I saw your links and they were ok. I also saw the issue with the 
pre code, what you think would be the next step to mitigate this?


cheers,

Mario


On 22/06/18 09:03, mick at flossmanuals.net wrote:
>
> Hi there Mario,
>
> I've sent you the links in another email.
> I have noticed the same bug that Greg mentioned and I've logged it here.
>
> https://dev.sourcefabric.org/browse/BK-2501
>
> Please note - anyone thinking of creating a book which requires a pdf 
> output and may need long 
 code entries should be aware of this.
> Andy O, I'm thinking of you especially here.
>
> Bug report follows.
>
> Hi there,
>
> Pdf outputs do not format 
 code correctly - no line wrapping.As 
> many of Floss manuals books have such code we can't really progress, 
> without some kind of work around.
> Screenshot example attached - this is a pdf screen output from 
> following manual - Chapter 14 is shown.
>
> https://omnibook.pro/chuck/_edit/#toc
>
> Thanks
>
> Mick
>
>
> On 20/06/18 19:19, mario buoninfante wrote:
>> Hi Mick,
>>
>> that's absolutely fine by me. the only thing I can't see any PDF there.
>>
>>
>> cheers,
>>
>> Mario
>>
>>
>> On 19/06/18 14:22, mick at flossmanuals.net wrote:
>>> Hi there Mario,
>>>
>>> Great work on the edits you and your team have been making.
>>>
>>> Should we update the manual listed at http://flossmanuals.net?
>>>
>>> Also I generated a couple of pdfs here - could you check them and see
>>> which one you prefer?
>>>
>>> https://omnibook.pro/chuck/_edit/#publish
>>>
>>> Let me know if you can't see them.
>>>
>>> Thanks
>>>
>>> Mick
>>>
>>>
>>> On 03/03/18 18:38, mario buoninfante wrote:
>>>>
>>>> thanks, I've got access to the ChucK manual using the code you sent 
>>>> me.
>>>>
>>>> my username is mario.buoninfante
>>>>
>>>>
>>>> cheers,
>>>>
>>>> Mario
>>>>
>>>> _______________________________________________
>>>> Discuss mailing list
>>>> Discuss at lists.flossmanuals.net
>>>> http://lists.flossmanuals.net/listinfo.cgi/discuss-flossmanuals.net -
>>>> you can unsubscribe here
>>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: 

From mick at flossmanuals.net  Mon Jun 25 03:17:52 2018
From: mick at flossmanuals.net (mick at flossmanuals.net)
Date: Mon, 25 Jun 2018 11:17:52 +0100
Subject: [FM Discuss] PDF generation error on Omnibook for 
 code
 [was - Chuck manual ]
In-Reply-To: 
References: 
 <9fd861c3-8529-b484-6d51-d95175823d5e@flossmanuals.net>
 
 <3d8b7696-3173-4436-6e8b-20bb1d65fc3c@flossmanuals.net>
 
Message-ID: <1a4e95a8-b6ad-7a9b-29a3-a5cea3119821@flossmanuals.net>

Hi there Mario,

I've done some more digging into this and found out the root cause.

Hopefully this can fixed soon. But if not I is fixable by some code
editing as well. So let's wait a bit and then see.

In the mean time I'll add the updated version of the HTML and epub to
flossmanuals.net if that's ok?

Thanks
Mick


On 23/06/18 11:58, mario buoninfante wrote:
>
> Hi Mick,
>
>
> thanks I saw your links and they were ok. I also saw the issue with
> the pre code, what you think would be the next step to mitigate this?
>
>
> cheers,
>
> Mario
>
>
> On 22/06/18 09:03, mick at flossmanuals.net wrote:
>>
>> Hi there Mario,
>>
>> I've sent you the links in another email.
>> I have noticed the same bug that Greg mentioned and I've logged it here.
>>
>> https://dev.sourcefabric.org/browse/BK-2501
>>
>> Please note - anyone thinking of creating a book which requires a pdf
>> output and may need long 
 code entries should be aware of this.
>> Andy O, I'm thinking of you especially here.
>>
>> Bug report follows.
>>
>> Hi there,
>>
>> Pdf outputs do not format 
 code correctly - no line wrapping.As
>> many of Floss manuals books have such code we can't really progress,
>> without some kind of work around.
>> Screenshot example attached - this is a pdf screen output from
>> following manual - Chapter 14 is shown.
>>
>> https://omnibook.pro/chuck/_edit/#toc
>>
>> Thanks
>>
>> Mick
>>
>>
>> On 20/06/18 19:19, mario buoninfante wrote:
>>> Hi Mick,
>>>
>>> that's absolutely fine by me. the only thing I can't see any PDF there.
>>>
>>>
>>> cheers,
>>>
>>> Mario
>>>
>>>
>>> On 19/06/18 14:22, mick at flossmanuals.net wrote:
>>>> Hi there Mario,
>>>>
>>>> Great work on the edits you and your team have been making.
>>>>
>>>> Should we update the manual listed at http://flossmanuals.net?
>>>>
>>>> Also I generated a couple of pdfs here - could you check them and see
>>>> which one you prefer?
>>>>
>>>> https://omnibook.pro/chuck/_edit/#publish
>>>>
>>>> Let me know if you can't see them.
>>>>
>>>> Thanks
>>>>
>>>> Mick
>>>>
>>>>
>>>> On 03/03/18 18:38, mario buoninfante wrote:
>>>>>
>>>>> thanks, I've got access to the ChucK manual using the code you
>>>>> sent me.
>>>>>
>>>>> my username is mario.buoninfante
>>>>>
>>>>>
>>>>> cheers,
>>>>>
>>>>> Mario
>>>>>
>>>>> _______________________________________________
>>>>> Discuss mailing list
>>>>> Discuss at lists.flossmanuals.net
>>>>> http://lists.flossmanuals.net/listinfo.cgi/discuss-flossmanuals.net -
>>>>> you can unsubscribe here
>>>
>>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: 

From mario.buoninfante at gmail.com  Mon Jun 25 05:43:47 2018
From: mario.buoninfante at gmail.com (Mario Buoninfante)
Date: Mon, 25 Jun 2018 13:43:47 +0100
Subject: [FM Discuss] PDF generation error on Omnibook for 
 code
 [was - Chuck manual ]
In-Reply-To: <1a4e95a8-b6ad-7a9b-29a3-a5cea3119821@flossmanuals.net>
References: 
 <9fd861c3-8529-b484-6d51-d95175823d5e@flossmanuals.net>
 
 <3d8b7696-3173-4436-6e8b-20bb1d65fc3c@flossmanuals.net>
 
 <1a4e95a8-b6ad-7a9b-29a3-a5cea3119821@flossmanuals.net>
Message-ID: 

Hi Mick,

good that you found the root cause ;)
totally fine with updating the HTML and epub version to flossmanuals.net.

cheers,
Mario

On 25 June 2018 at 11:17, mick at flossmanuals.net 
wrote:

> Hi there Mario,
>
> I've done some more digging into this and found out the root cause.
>
> Hopefully this can fixed soon. But if not I is fixable by some code
> editing as well. So let's wait a bit and then see.
>
> In the mean time I'll add the updated version of the HTML and epub to
> flossmanuals.net if that's ok?
>
> Thanks
> Mick
>
> On 23/06/18 11:58, mario buoninfante wrote:
>
> Hi Mick,
>
>
> thanks I saw your links and they were ok. I also saw the issue with the
> pre code, what you think would be the next step to mitigate this?
>
>
> cheers,
>
> Mario
>
> On 22/06/18 09:03, mick at flossmanuals.net wrote:
>
> Hi there Mario,
>
> I've sent you the links in another email.
> I have noticed the same bug that Greg mentioned and I've logged it here.
>
> https://dev.sourcefabric.org/browse/BK-2501
>
> Please note - anyone thinking of creating a book which requires a pdf
> output and may need long 
 code entries should be aware of this.
> Andy O, I'm thinking of you especially here.
>
> Bug report follows.
>
> Hi there,
>
> Pdf outputs do not format 
 code correctly - no line wrapping.As many
> of Floss manuals books have such code we can't really progress, without
> some kind of work around.
> Screenshot example attached - this is a pdf screen output from following
> manual - Chapter 14 is shown.
>
> https://omnibook.pro/chuck/_edit/#toc
>
> Thanks
>
> Mick
>
> On 20/06/18 19:19, mario buoninfante wrote:
>
> Hi Mick,
>
> that's absolutely fine by me. the only thing I can't see any PDF there.
>
>
> cheers,
>
> Mario
>
>
> On 19/06/18 14:22, mick at flossmanuals.net wrote:
>
> Hi there Mario,
>
> Great work on the edits you and your team have been making.
>
> Should we update the manual listed at http://flossmanuals.net?
>
> Also I generated a couple of pdfs here - could you check them and see
> which one you prefer?
>
> https://omnibook.pro/chuck/_edit/#publish
>
> Let me know if you can't see them.
>
> Thanks
>
> Mick
>
>
> On 03/03/18 18:38, mario buoninfante wrote:
>
>
> thanks, I've got access to the ChucK manual using the code you sent me.
>
> my username is mario.buoninfante
>
>
> cheers,
>
> Mario
>
> _______________________________________________
> Discuss mailing list
> Discuss at lists.flossmanuals.net
> http://lists.flossmanuals.net/listinfo.cgi/discuss-flossmanuals.net -
> you can unsubscribe here
>
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: